Binders and Repair Materials (Solvent-Free)

Product Overview

HC51 Epoxy Color Sand Flooring is a two-component, solvent-free epoxy self-leveling system designed to create seamless decorative floors with a natural colored-sand texture. The formulation combines epoxy resin, suspended colored sand, wear-resistant fillers, weather-resistant pigments, multifunctional additives and a low-odor transparent curing agent.

The cured surface offers high hardness, strong abrasion resistance, excellent leveling, water resistance and easy maintenance. Multiple colors are available, making HC51 suitable for both functional industrial floors and premium decorative interiors.

Key Features

• Decorative seamless finish: Rich colored-sand texture with a smooth, high-gloss appearance.
• High wear and impact resistance: Designed for pedestrian traffic, equipment movement and daily service wear.
• Strong adhesion: Forms a firm bond with properly prepared and primed substrates.
• Water and mold resistance: Dense surface helps simplify routine cleaning and maintenance.
• Self-leveling application: Good flow and leveling help create an integrated, even floor.
• Multi-substrate compatibility: Suitable for cement, ceramic tile, marble and terrazzo when used with the matching primer.

Typical Applications

• Residential renovation and new-build floors, including living rooms, kitchens and bathrooms
• High-standard factories, workshops and laboratories
• Underground parking garages and warehouses
• Shopping malls, showrooms and other premium commercial spaces
• Schools, hospitals and other public-building interiors

Technical Data

Application Guidelines

1. Prepare a clean, sound and level substrate. Remove dust, oil, loose material and standing water.
2. Use the dedicated primer selected for the substrate type.
3. Mix Components A and B thoroughly. Use the mixed material within approximately 1 hour in summer or 2 hours in winter.
4. Apply with a 2 mm notched trowel, then use a spiked roller to release trapped air.
5. Level substrate variations greater than 2 mm before application.
6. Recommended application temperature: 5-35°C. Do not apply below 5°C or when relative humidity exceeds 80%.
7. Avoid application during rain or in excessively humid conditions.

Packaging and Storage

Packaging: 22.2 kg Component A + 2.8 kg Component B per set.

Shelf life: 12 months from production date when stored unopened in a dry, ventilated indoor area at 5-35°C. Protect from direct sunlight, freezing, open flames and heat sources.

Safety

Wear suitable gloves, eye protection and work clothing during mixing and application. Avoid contact with skin and eyes. If material enters the eyes, rinse immediately with plenty of clean water and seek medical attention. Refer to the product SDS before use.